2006-2011 Kawasaki ZX14 9.5:1 Turbo 84mm std bore x 61mm stroke (1352cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2006-2011 Kawasaki ZX14 9.5:1 Turbo 84mm std bore x 61mm stroke (1352cc) piston kit
|
Make |
Kawasaki |
|
Engine Size |
1352cc |
|
Model |
ZX14 |
|
Year |
2006-2011 |
|
Bore (mm) |
84mm |
|
Comp Ratio |
9.5:1 |
|
Piston Part Number |
M4035 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PSR5412 |
|
Pin Part Number |
787-2250-16CP1C |
|
Locks Part Number |
787x050 SWL |
|
Rings |
CPN-3307 |
|
Shelf (RPO) or Made to Order (MTO) |
MTO |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2006-2011 Kawasaki ZX14 9.5:1 Turbo 84mm std bore x 61mm stroke (1352cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended clearances for the M4035 piston kit?
For the M4035 piston kit, it's crucial to follow the manufacturer's guidelines for piston-to-cylinder clearance and ring end gaps. Typically, a clearance of 0.0025" to 0.0035" is a good starting point for the bore, but this can vary based on your specific application and tuning. Always consult the supplied instructions for precise measurements.
What type of fuel is recommended for the 9.5:1 compression ratio of these pistons?
Given the 9.5:1 compression ratio, it is advisable to use high-octane fuel to prevent detonation, especially under boost conditions. A minimum of 98 RON is recommended for optimal performance and reliability. Always consider your tuning setup and boost levels when selecting fuel.
Do I need to modify my engine for the M4035 piston kit?
Installation of the M4035 piston kit may require modifications depending on your engine's current setup. Ensure that the cylinder head and combustion chamber are compatible with the increased compression ratio. Additionally, check for adequate clearance with valves and other components, especially if you're using a turbocharger.
What is included in the M4035 piston kit?
The M4035 piston kit includes two forged pistons, a complete set of rings, wrist pins, and clips. This comprehensive kit is designed for ease of installation and optimal performance in your Kawasaki ZX14.
What is the significance of the double forced pin oilers in these pistons?
The double forced pin oilers in the M4035 pistons enhance lubrication to the wrist pins, reducing friction and wear during high-performance operation. This feature is particularly beneficial in turbo applications, where increased heat and load can lead to premature failure if not adequately managed.
