2005-2007 Suzuki King Quad 700 11.5:1 106mm +4mm oversize bore x 85mm stroke piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2005-2007 Suzuki King Quad 700 11.5:1 106mm +4mm oversize bore x 85mm stroke piston kit
|
Make |
Suzuki |
|
Engine Size |
700cc 750cc |
|
Model |
King Quad 700 / 750 |
|
Year |
2005-2007 |
|
Bore (mm) |
106mm |
|
Comp Ratio |
11.5:1 |
|
Piston Part Number |
M4014 |
|
Gasket Part Number |
C3128 |
|
Conrod Part Number |
Custom |
|
Pin Part Number |
W905-2250-15CP1C |
|
Locks Part Number |
905X073 SWL |
|
Rings |
1-MG10-4175 2-MS20-4175-THG 3-H30-4170-0NC |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2005-2007 Suzuki King Quad 700 11.5:1 106mm +4mm oversize bore x 85mm stroke piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the specific machining requirements for the M4014 piston kit?
The M4014 piston kit is designed for a 106mm bore and requires precise machining to ensure proper fitment. It's essential to check and set the bore clearance according to the supplied instructions. Additionally, ensure the ring gaps are set correctly to avoid any performance issues.
What is the recommended compression ratio for the M4014 piston kit?
The M4014 piston kit has a compression ratio of 11.5:1. This higher compression can provide increased performance, but it is crucial to ensure that your engine is tuned appropriately to handle this ratio, especially regarding fuel quality and ignition timing.
Can I use the M4014 piston kit with stock conrods?
While the M4014 piston kit can be used with stock conrods, it is advisable to assess the condition and strength of the stock components. Upgrading to performance conrods may be beneficial, especially if you plan to increase horsepower or RPM beyond stock levels.
What type of fuel is recommended for the M4014 piston kit?
For optimal performance with the M4014 piston kit's 11.5:1 compression ratio, premium fuel with a higher octane rating is recommended. This helps prevent detonation and ensures the engine runs smoothly under load.
What components are included in the M4014 piston kit?
The M4014 piston kit includes two forged pistons, ring sets, wrist pins, and clips. This complete kit is designed to provide everything needed for a successful piston replacement in your Suzuki King Quad 700 or 750.
