1999-2007 Suzuki Hayabusa 14:0:1 gas ports 84mm +3mm oversize bore x 63mm stroke (1396cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
1999-2007 Suzuki Hayabusa 14:0:1 gas ports 84mm +3mm oversize bore x 63mm stroke (1396cc) piston kit
|
Make |
Suzuki |
|
Engine Size |
1300cc |
|
Model |
Hayabusa |
|
Year |
1999-2007 |
|
Bore (mm) |
84mm |
|
Comp Ratio |
14.0:1 |
|
Piston Part Number |
M4005B |
|
Gasket Part Number |
C8658 |
|
Conrod Part Number |
PSR4720 |
|
Pin Part Number |
787-2000-12CP1C |
|
Locks Part Number |
787x050 SWL |
|
Rings |
CPNG-2-3307 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 1999-2007 Suzuki Hayabusa 14:0:1 gas ports 84mm +3mm oversize bore x 63mm stroke (1396cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M4005B piston kit?
For the M4005B piston kit, it is crucial to follow the manufacturer's specifications for bore clearance. Typically, a clearance of 0.0025" to 0.0035" is recommended, but this can vary based on your specific engine build and intended use. Always consult your engine builder for the best results.
What type of fuel is recommended for the 14:0:1 compression ratio of these pistons?
With a compression ratio of 14:0:1, it is advisable to use high-octane fuel, typically 98 RON or higher, to prevent knock and ensure optimal performance. Proper tuning and fuel quality are essential for reliability at this compression level.
Do I need to modify my conrods when using the M4005B piston kit?
Yes, when using the M4005B piston kit, it is often necessary to ensure that your conrods are compatible with the new piston dimensions. The conrod part number PSR4720 should be checked for proper fitment, and you may need to verify small-end and big-end sizes for correct installation.
What is the significance of the double forced pin oilers in these pistons?
The double forced pin oilers in the M4005B piston kit enhance lubrication to the wrist pins, reducing friction and heat. This design feature is particularly beneficial in high-performance applications, helping to improve reliability and longevity under extreme conditions.
How should I handle the installation of the M4005B piston kit?
When installing the M4005B piston kit, ensure that you follow the provided instructions closely. Pay special attention to ring end gaps and piston-to-cylinder clearances. Proper installation is critical for performance and reliability, so consider consulting with an experienced engine builder if you're unsure.
