1999-2007 Suzuki Hayabusa 14:1 gas ports 83mm +2mm oversize bore x 63mm stroke (1363cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
1999-2007 Suzuki Hayabusa 14:1 gas ports 83mm +2mm oversize bore x 63mm stroke (1363cc) piston kit
|
Make |
Suzuki |
|
Engine Size |
1300cc |
|
Model |
Hayabusa |
|
Year |
1999-2007 |
|
Bore (mm) |
83mm |
|
Comp Ratio |
14.0:1 |
|
Piston Part Number |
M4003 |
|
Gasket Part Number |
C8657 |
|
Conrod Part Number |
PSR4720 |
|
Pin Part Number |
787-2000-12CP1C |
|
Locks Part Number |
787x050 SWL |
|
Rings |
CPNG-2-3268 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 1999-2007 Suzuki Hayabusa 14:1 gas ports 83mm +2mm oversize bore x 63mm stroke (1363cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended piston-to-cylinder clearances for the M4003 piston kit?
For the M4003 piston kit, it is crucial to follow the manufacturer's specifications for piston-to-cylinder clearances. Typically, this will depend on the specific application and intended use of the engine. Ensure you consult the supplied instructions for the exact clearances to achieve optimal performance and reliability.
Can I use the M4003 pistons with stock Hayabusa conrods?
The M4003 pistons are designed to work with aftermarket conrods like the PSR4720. While stock Hayabusa conrods may fit, it is advisable to verify compatibility, especially considering the increased performance demands and potential for higher RPMs with the 14:1 compression ratio.
What type of fuel is recommended for the M4003 piston kit?
Given the 14:1 compression ratio of the M4003 piston kit, it is recommended to use high-octane fuel to prevent knocking and ensure optimal performance. Always consider the tuning and setup of your engine, as fuel quality can significantly impact reliability and power output.
What is the weight tolerance for the M4003 pistons?
The M4003 pistons are balanced to within +/- 1 gram, which is essential for maintaining engine smoothness and performance. When building your engine, ensure that the entire rotating assembly is balanced to avoid vibrations and potential damage.
Do I need to modify my cylinder head for the M4003 piston kit?
Depending on your specific engine setup and performance goals, you may need to modify the cylinder head to accommodate the increased compression ratio of the M4003 pistons. It is advisable to consult with an experienced engine builder to assess any necessary modifications for optimal performance.
