2007-2020 Kawasaki ZX6R 69mm std bore x 42.5mm stroke (636)cc piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2007-2020 Kawasaki ZX6R 69mm std bore x 42.5mm stroke (636)cc piston kit
|
Make |
Kawasaki |
|
Engine Size |
600cc |
|
Model |
ZX6R |
|
Year |
2007-2020 |
|
Bore (mm) |
69mm |
|
Comp Ratio |
13.8:1 |
|
Piston Part Number |
M3071 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
07-12 PSR10386 13-19 PSR9661 |
|
Pin Part Number |
591-1500-13CP1C |
|
Locks Part Number |
591x050 SWL |
|
Rings |
MAC06900 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2007-2020 Kawasaki ZX6R 69mm std bore x 42.5mm stroke (636)cc piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended piston to cylinder clearance for the M3071 piston kit?
The recommended piston to cylinder clearance for the M3071 piston kit should be established based on the specific application and the builder's preferences. Typically, a clearance of around 0.0015" to 0.0025" is common for high-performance applications. Always consult the supplied instructions for specific guidelines.
What type of rings are included with the M3071 piston kit?
The M3071 piston kit includes MAC06900 ring sets, which are designed for optimal sealing and performance. Ensure that you follow the manufacturer's specifications for ring end gaps during installation.
What is the compression ratio of the M3071 piston kit and how does it affect performance?
The M3071 piston kit has a compression ratio of 13.8:1. This high compression ratio can enhance performance by increasing the engine's thermal efficiency and power output. However, it is crucial to use high-quality fuel and ensure proper tuning to avoid detonation.
What material are the M3071 pistons made from and how does it affect durability?
The M3071 pistons are forged from high-strength 2618 alloy, which provides excellent durability and resistance to thermal expansion. This material choice is ideal for high-performance applications where reliability under stress is critical.
Do I need to modify my conrods when using the M3071 piston kit?
Depending on the specific conrod part number you are using (PSR10386 for 07-12 models or PSR9661 for 13-19 models), some modifications may be necessary. Always check for proper fitment and clearances, and ensure that your conrods are compatible with the M3071 pistons.
