2008-2014 Kawasaki Teyrx Brute Force 11.0:1 90mm bore +5mm oversize x 66mm stroke (840cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2008-2014 Kawasaki Teyrx Brute Force 11.0:1 90mm bore +5mm oversize x 66mm stroke (840cc) piston kit
|
Make |
Kawasaki |
|
Engine Size |
750cc |
|
Model |
Teyrx Brute Force |
|
Year |
2008-2014 |
|
Bore (mm) |
90mm |
|
Comp Ratio |
11.0:1 |
|
Piston Part Number |
M3060 |
|
Gasket Part Number |
C3251 |
|
Conrod Part Number |
PSR4882 |
|
Pin Part Number |
W787-2000-15CP1C |
|
Locks Part Number |
787x050 SWL |
|
Rings |
CPN2-3543 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2008-2014 Kawasaki Teyrx Brute Force 11.0:1 90mm bore +5mm oversize x 66mm stroke (840cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M3060 piston kit?
For the M3060 piston kit, it is crucial to follow the manufacturer's specifications for bore clearance, which typically depends on the specific engine build. A general guideline is to aim for a clearance of around 0.0025" to 0.0035". Always consult the supplied instructions for precise measurements.
What type of fuel is recommended for the 11.0:1 compression ratio of the M3060 pistons?
With an 11.0:1 compression ratio, it is advisable to use high-octane fuel to prevent detonation and ensure optimal performance. A minimum of 95 RON is recommended, but always consider the specific tuning and conditions of your engine.
Do I need to modify my cylinder head when installing the M3060 piston kit?
Depending on your engine's current setup, you may need to modify the cylinder head to accommodate the increased compression ratio and ensure proper clearance. It's essential to check piston-to-valve clearance and adjust as necessary during installation.
What is the weight tolerance for the M3060 pistons?
The M3060 pistons are balanced to within +/- 1 gram, which helps maintain engine smoothness and reliability at high RPMs. Ensure that the entire rotating assembly is balanced for optimal performance.
What are the benefits of the double forced pin oilers in the M3060 piston kit?
The double forced pin oilers in the M3060 piston kit enhance lubrication at the wrist pin, reducing friction and wear. This feature contributes to improved reliability and longevity, especially under high-performance conditions.
