2020-2021 Kawasaki KRX1000 12.0:1 CR 92mm standard bore 75.1mm stroke (999cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2020-2021 Kawasaki KRX1000 12.0:1 CR 92mm standard bore 75.1mm stroke (999cc) piston kit
|
Make |
Kawasaki |
|
Engine Size |
1000cc |
|
Model |
Teryx KRX1000 |
|
Year |
2020-2021 |
|
Bore (mm) |
92mm |
|
Comp Ratio |
12.0:1 |
|
Piston Part Number |
M3041 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PR13220 |
|
Pin Part Number |
827-2000-15CP1C |
|
Locks Part Number |
827X063 SWL |
|
Rings |
CPN2-3622 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2020-2021 Kawasaki KRX1000 12.0:1 CR 92mm standard bore 75.1mm stroke (999cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended piston to cylinder clearance for the M3041 piston kit?
For the M3041 piston kit, the recommended piston to cylinder clearance should be set according to the specific engine build and intended use. Typically, a clearance of 0.0020" to 0.0025" is a good starting point, but always consult the supplied instructions and adjust based on your engine's requirements.
What type of fuel is suitable for the 12.0:1 compression ratio of these pistons?
The 12.0:1 compression ratio of the M3041 piston kit generally requires high-octane fuel to prevent detonation. It is advisable to use premium unleaded fuel with an octane rating of at least 98 RON, especially if the engine is tuned for performance.
Do I need to modify my engine for these pistons to fit?
The M3041 piston kit is designed for a standard bore of 92mm and a stroke of 75.1mm, which should fit the Kawasaki KRX1000 without major modifications. However, ensure that your engine is properly machined and that clearances are checked to accommodate the new pistons.
What is included in the M3041 piston kit?
The M3041 piston kit includes two forged pistons, a complete set of rings, wrist pins, and retaining clips. This comprehensive kit is designed for ease of installation and optimal performance.
How should I prepare the piston rings before installation?
Before installation, ensure that the piston rings are properly gapped according to the supplied instructions. It's also important to clean the rings and pistons thoroughly to remove any manufacturing residues, which will help ensure proper sealing and performance.
