2008-2014 Kawasaki Teyrx Brute Force 12.5:1 85mm std bore x 66mm stroke (749cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2008-2014 Kawasaki Teyrx Brute Force 12.5:1 85mm std bore x 66mm stroke (749cc) piston kit
|
Make |
Kawasaki |
|
Engine Size |
750cc |
|
Model |
Teyrx Brute Force |
|
Year |
2008-2014 |
|
Bore (mm) |
85mm |
|
Comp Ratio |
12.5:1 |
|
Piston Part Number |
M3029 |
|
Gasket Part Number |
C3284 |
|
Conrod Part Number |
PSR4882 |
|
Pin Part Number |
W787-2000-15CP1C |
|
Locks Part Number |
787x050 SWL |
|
Rings |
CPNG-2-3346 |
|
Shelf (RPO) or Made to Order (MTO) |
MTO |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2008-2014 Kawasaki Teyrx Brute Force 12.5:1 85mm std bore x 66mm stroke (749cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M3029 piston kit?
For the M3029 piston kit, the recommended bore clearance should be set according to the specific application and the engine builder's discretion. Typically, a clearance of 0.0025" to 0.0035" is a good starting point for high-performance applications, but always refer to the manufacturer's guidelines and adjust based on your engine's specific needs.
What type of fuel is recommended for the 12.5:1 compression ratio of these pistons?
Given the 12.5:1 compression ratio of the M3029 pistons, it is advisable to use high-octane fuel, typically 98 RON or higher, to prevent detonation and ensure optimal performance. Proper tuning and fuel quality are crucial for reliability at this compression level.
Do I need to modify my cylinder head to use the M3029 piston kit?
While the M3029 piston kit is designed to fit standard applications, modifications to the cylinder head may be necessary to optimise combustion efficiency and prevent clearance issues, especially at higher performance levels. It's best to consult with an experienced engine builder for specific recommendations.
What is included in the M3029 piston kit?
The M3029 piston kit includes two forged pistons, a complete set of rings, wrist pins, and clips. This comprehensive kit is designed for ease of installation and performance enhancement.
What machining processes are recommended before installing the M3029 pistons?
Before installing the M3029 pistons, it is recommended to hone the cylinder bores to achieve the correct clearance and ensure a proper fit. Additionally, check the ring end gaps and adjust them according to the supplied instructions for optimal performance.
