2000-2005 Kawasaki ZX12R 13.5:1 85mm +2mm oversize bore x 55.4mm stroke piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2000-2005 Kawasaki ZX12R 13.5:1 85mm +2mm oversize bore x 55.4mm stroke piston kit
|
Make |
Kawasaki |
|
Engine Size |
1200cc |
|
Model |
ZX12R |
|
Year |
2000-2005 |
|
Bore (mm) |
85mm |
|
Comp Ratio |
13.5:1 |
|
Piston Part Number |
M3015 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PSR5410 |
|
Pin Part Number |
W827-2000-15CP1C |
|
Locks Part Number |
827x063 SWL |
|
Rings |
CPN-2-3347 |
|
Shelf (RPO) or Made to Order (MTO) |
MTO |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2000-2005 Kawasaki ZX12R 13.5:1 85mm +2mm oversize bore x 55.4mm stroke piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M3015 piston kit?
The recommended bore clearance for the M3015 piston kit is typically around 0.0020" to 0.0025". However, it's crucial to verify this with your specific engine build and ensure proper fitment according to the manufacturer's guidelines.
What type of conrods are compatible with the M3015 piston kit?
The M3015 piston kit is designed to work with conrods such as the PSR5410. Ensure that the conrods are properly matched and that big-end clearances are checked for optimal performance.
What is the compression ratio of the M3015 piston kit and how does it affect performance?
The M3015 piston kit has a compression ratio of 13.5:1. This high compression ratio can improve power output, but it requires careful tuning and high-octane fuel to prevent detonation and ensure reliability.
What is included in the M3015 piston kit?
The M3015 piston kit includes two forged pistons, a complete set of rings, wrist pins, and clips. Ensure all components are installed according to the provided instructions for optimal performance.
Are there any specific machining requirements for the M3015 pistons?
Yes, the M3015 pistons may require specific machining such as honing the cylinder bores to achieve the correct clearance and ensuring the piston-to-cylinder fit is within the recommended specifications. Always consult your engine builder for precise machining needs.
