2000-2005 Kawasaki ZX12R 13.5:1 83mm std bore x 55.4mm stroke (1198cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2000-2005 Kawasaki ZX12R 13.5:1 83mm std bore x 55.4mm stroke (1198cc) piston kit
|
Make |
Kawasaki |
|
Engine Size |
1200cc |
|
Model |
ZX12R |
|
Year |
2000-2005 |
|
Bore (mm) |
83mm |
|
Comp Ratio |
13.5:1 |
|
Piston Part Number |
M3014 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PSR5410 |
|
Pin Part Number |
W827-2000-15CP1C |
|
Locks Part Number |
827x063 SWL |
|
Rings |
CPN-2-3268 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2000-2005 Kawasaki ZX12R 13.5:1 83mm std bore x 55.4mm stroke (1198cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended piston-to-cylinder clearances for the M3014 piston kit?
For the M3014 piston kit, it is crucial to follow the manufacturer's specifications for piston-to-cylinder clearances. Generally, a clearance of 0.0025" to 0.0035" is typical for high-performance applications, but always verify with the supplied instructions and adjust based on your specific engine build.
What type of fuel is recommended for the 13.5:1 compression ratio of the M3014 pistons?
Given the 13.5:1 compression ratio, it is advisable to use high-octane fuel, typically 98 RON or higher, to prevent knocking and ensure optimal performance. Fuel quality is critical for reliability and performance at this compression level.
Do I need to modify my cylinder head when using the M3014 pistons?
Depending on your specific engine setup, you may need to modify the cylinder head to accommodate the increased compression ratio. This could involve adjusting valve clearances or ensuring proper combustion chamber shape to prevent detonation.
What is included in the M3014 piston kit?
The M3014 piston kit includes two pistons, complete ring sets, wrist pins, and clips. Ensure all components are inspected for quality and fitment before installation.
Can I use the M3014 pistons with stock conrods?
While the M3014 pistons can be used with stock conrods, it is recommended to use performance conrods such as the PSR5410 for enhanced strength and reliability, especially under high power conditions. Always check for compatibility and clearances during installation.
