2009-2014 Honda TRX700XX 12.0:1 102mm std bore x 84mm stroke (686cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2009-2014 Honda TRX700XX 12.0:1 102mm std bore x 84mm stroke (686cc) piston kit
|
Make |
Honda |
|
Engine Size |
700cc |
|
Model |
TRX700XX |
|
Year |
2009-2014 |
|
Bore (mm) |
102mm |
|
Comp Ratio |
12.0:1 |
|
Piston Part Number |
M2076 |
|
Gasket Part Number |
C3286 |
|
Conrod Part Number |
Custom |
|
Pin Part Number |
945-2250-15CP1C |
|
Locks Part Number |
945x073 SWL |
|
Rings |
RS1610XHHNCR-4015 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2009-2014 Honda TRX700XX 12.0:1 102mm std bore x 84mm stroke (686cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended piston-to-cylinder clearances for the M2076 piston kit?
For the M2076 piston kit, it is crucial to follow the manufacturer's specifications for piston-to-cylinder clearances. Typically, a clearance of 0.0025" to 0.0035" is recommended, but this can vary based on your specific engine build and intended use. Always consult the supplied instructions for the most accurate guidance.
What type of fuel is recommended for the 12.0:1 compression ratio of the M2076 pistons?
With a 12.0:1 compression ratio, it is advisable to use high-octane fuel, typically 98 RON or higher, to prevent knocking and ensure optimal performance. The fuel quality can significantly affect engine reliability and performance, so choose wisely.
Do I need to modify my conrods when using the M2076 piston kit?
Depending on your specific conrod setup, you may need to ensure that the small-end and big-end clearances are within acceptable limits. The M2076 kit comes with wrist pins, but it's essential to verify that your conrods are compatible and properly machined for the best fit.
What is included in the M2076 piston kit?
The M2076 piston kit includes two forged pistons, a complete set of rings, wrist pins, and clips. This comprehensive kit is designed to provide everything you need for a successful installation, but ensure you have the correct tools and follow the installation instructions carefully.
How should I break in my engine after installing the M2076 pistons?
After installing the M2076 pistons, follow a proper break-in procedure to ensure longevity and performance. This typically involves running the engine at varying RPMs and avoiding full throttle for the first few hundred kilometres. Refer to your engine builder's guidelines for specific break-in recommendations.
