2004-2005 Honda TRX450R 11.0:1 95mm +1mm oversize bore x 64.8mm stroke (459cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2004-2005 Honda TRX450R 11.0:1 95mm +1mm oversize bore x 64.8mm stroke (459cc) piston kit
|
Make |
Honda |
|
Engine Size |
450cc |
|
Model |
TRX450R |
|
Year |
2004-2005 |
|
Bore (mm) |
95mm |
|
Comp Ratio |
11.0:1 |
|
Piston Part Number |
M2022 |
|
Gasket Part Number |
C7199 |
|
Conrod Part Number |
PSR8818A |
|
Pin Part Number |
W827-2000-15CP1C |
|
Locks Part Number |
827x063 SWL |
|
Rings |
CPN2-3740 |
|
Shelf (RPO) or Made to Order (MTO) |
MTO |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2004-2005 Honda TRX450R 11.0:1 95mm +1mm oversize bore x 64.8mm stroke (459cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the recommended clearances for the M2022 piston kit?
For the M2022 piston kit, it's crucial to follow the manufacturer's specifications for piston-to-cylinder clearance and ring end gaps. Typically, a clearance of 0.0025" to 0.0035" is common for performance applications, but always refer to the supplied instructions for the exact requirements.
What type of conrod is compatible with the M2022 piston kit?
The M2022 piston kit is designed to work with the PSR8818A conrod. Ensure that the conrod is properly fitted and that the big-end is honed to match the piston pin size for optimal performance.
What is the compression ratio of the M2022 piston kit and how does it affect performance?
The M2022 piston kit has a compression ratio of 11.0:1. This higher compression can improve horsepower and torque, but it also requires careful tuning and high-quality fuel to avoid knock and ensure reliability.
What is included in the M2022 piston kit?
The M2022 piston kit includes two forged pistons, ring sets, wrist pins, and clips. This complete kit is designed for ease of installation and optimal performance in the Honda TRX450R.
What machining processes are recommended for the M2022 piston kit?
Before installation of the M2022 piston kit, ensure the cylinder bore is properly sized and honed to match the 95mm piston diameter. Additionally, check that the ring gaps are set according to the provided specifications for best performance and longevity.
