2017-2019 Arctic Cat 9000 series 8.5:1 std bore 66.2mm stroke (998cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2017-2019 Arctic Cat 9000 series 8.5:1 std bore 66.2mm stroke (998cc) piston kit
|
Make |
Arctic Cat |
|
Engine Size |
998cc |
|
Model |
All 9000 series |
|
Year |
2017-2020 |
|
Bore (mm) |
80mm |
|
Comp Ratio |
8.5:1 |
|
Piston Part Number |
M1067 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PSR10341 |
|
Pin Part Number |
827-2000-18CP1C |
|
Locks Part Number |
827x063 SWL |
|
Rings |
CPNG-2-3150 |
|
Shelf (RPO) or Made to Order (MTO) |
MTO |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2017-2019 Arctic Cat 9000 series 8.5:1 std bore 66.2mm stroke (998cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M1067 piston kit?
For the M1067 piston kit, it is essential to follow the manufacturer's specifications for bore clearance. Typically, a clearance of 0.0025" to 0.0035" is recommended, but this can vary based on your specific engine build and operating conditions. Always consult with your engine builder for precise measurements.
What type of rings are included in the M1067 piston kit?
The M1067 piston kit includes CP Carrillo's CPNG-2-3150 ring sets, which are designed for optimal sealing and performance. Ensure that you follow the recommended ring end gap specifications provided with the kit for best results.
Can I use the M1067 pistons with stock conrods?
While the M1067 pistons can technically be used with stock conrods, it is advisable to upgrade to performance conrods, such as the PSR10341, for increased reliability and strength, especially under higher power levels and stress.
What is the compression ratio of the M1067 piston kit, and how does it affect performance?
The M1067 piston kit has a compression ratio of 8.5:1. This lower compression ratio is suitable for applications where boost is expected, as it allows for more aggressive tuning without risking detonation. Always ensure your engine is tuned appropriately for the compression ratio.
What machining processes are required for the M1067 piston kit installation?
When installing the M1067 piston kit, it is crucial to ensure that the cylinder bores are properly honed to match the pistons. Additionally, check that the piston pin bores are clean and free of debris. Line boring may be necessary for main caps if you are upgrading to performance components, so consult your engine builder for specific machining requirements.
