2017-2019 Arctic Cat 9000 series 9.0:1 std bore 66.2mm stroke (998cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2017-2019 Arctic Cat 9000 series 9.0:1 std bore 66.2mm stroke (998cc) piston kit
|
Make |
Arctic Cat |
|
Engine Size |
998cc |
|
Model |
All 9000 series |
|
Year |
2017-2020 |
|
Bore (mm) |
80mm |
|
Comp Ratio |
9.0:1 |
|
Piston Part Number |
M1064 |
|
Gasket Part Number |
Call |
|
Conrod Part Number |
PSR10341 |
|
Pin Part Number |
827-2000-18CP1C |
|
Locks Part Number |
827x063 SWL |
|
Rings |
CPNG-2-3150 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2017-2019 Arctic Cat 9000 series 9.0:1 std bore 66.2mm stroke (998cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended piston-to-cylinder clearance for the M1064 piston kit?
The recommended piston-to-cylinder clearance for the M1064 piston kit should be determined based on your specific engine build and application. Generally, a clearance of 0.0025" to 0.0035" is common for performance applications, but always refer to the manufacturer's instructions and adjust according to your engine's requirements.
What type of rings are included in the M1064 piston kit?
The M1064 piston kit includes CP Carrillo's CPNG-2-3150 rings, which are designed for high-performance applications. Ensure that the ring end gaps are set according to the supplied instructions for optimal performance and reliability.
Can I use the M1064 pistons with stock conrods?
Yes, the M1064 pistons can be used with stock conrods, but it is crucial to ensure that the conrods are in good condition and capable of handling the increased performance. Always check for proper fitment and clearances during assembly.
What is the compression ratio of the M1064 piston kit?
The M1064 piston kit has a compression ratio of 9.0:1. This ratio is suitable for a balance of performance and reliability, but ensure that your engine's tuning and fuel quality are appropriate for this compression level.
What materials are the M1064 pistons made from?
The M1064 pistons are forged from high-strength 2618 alloy, which offers excellent durability and performance characteristics. This material is ideal for high-performance applications where strength and reliability are critical.
