2002-2005 Yamaha Raptor/Rhino 660 11:1 102mm +2mm oversize bore x 84mm stroke (686cc) piston kit
Please allow up to 2 weeks for delivery. If it is any longer, we will contact you.
Feel free to contact us to confirm delivery time before you order.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
2002-2005 Yamaha Raptor/Rhino 660 11:1 102mm +2mm oversize bore x 84mm stroke (686cc) piston kit
|
Make |
Yamaha |
|
Engine Size |
660cc |
|
Model |
Raptor / Rhino660 |
|
Year |
2002-2005 |
|
Bore (mm) |
102mm |
|
Comp Ratio |
11.0:1 |
|
Piston Part Number |
M1016B |
|
Gasket Part Number |
C7798 |
|
Conrod Part Number |
PSR5020 |
|
Pin Part Number |
W866-2250-15CP1C |
|
Locks Part Number |
866x063 SWL |
|
Rings |
CPN-4016 |
|
Shelf (RPO) or Made to Order (MTO) |
ROP |
Proudly made in the USA by CP Carrillo Pistons!
- Fully CNC machined
- Balanced to +/- 1 gram
- Double forced pin oilers
- Forged from high strength 2618 alloy
- Designed for maximum performance, horsepower and reliability
- Complete kit includes two pistons, ring sets, wrist pins and clips
- Follow ring end gap and piston to cylinder clearances as per the supplied instructions
| Product Name | 2002-2005 Yamaha Raptor/Rhino 660 11:1 102mm +2mm oversize bore x 84mm stroke (686cc) piston kit |
|---|---|
| Brands | CP Carrillo |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M1016B piston kit?
The recommended bore clearance for the M1016B piston kit should be determined by the engine builder based on the specific application and operating conditions. Typically, a clearance of 0.0015" to 0.0025" is common for performance applications, but always refer to the manufacturer's guidelines and adjust based on your engine's characteristics.
What compression ratio does the M1016B piston kit provide?
The M1016B piston kit provides a compression ratio of 11.0:1 when installed in a compatible engine. Ensure that your engine's combustion chamber is suitable for this compression ratio to prevent detonation and achieve optimal performance.
Can I use the M1016B piston kit with stock conrods?
While the M1016B piston kit can be used with stock conrods, it is advisable to inspect the conrods for strength and integrity, especially when increasing compression and power. Upgrading to performance conrods may provide better reliability under higher stress conditions.
What type of fuel is recommended for the M1016B piston kit?
For the M1016B piston kit, it is recommended to use high-octane fuel, typically 98 RON or higher, to accommodate the 11.0:1 compression ratio. This helps prevent knocking and ensures the engine runs smoothly under load.
What machining processes are required for the M1016B piston kit installation?
When installing the M1016B piston kit, you may need to perform cylinder honing to achieve the correct bore size and finish. Additionally, ensure that the piston ring gaps are set according to the supplied instructions to optimise performance and reliability.
