Ford 408ci STD-TFS 4.030 Bore 1.200 CH -25cc (CP Bullets BF6064-030)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Ford |
|
Engine Type |
Small Block |
|
Part Number |
BF6064-030 |
|
Bore (in) |
4.03 |
|
Stroke (in) |
4 |
|
Rod Length (in) |
6.25 |
|
Comp Height |
1.2 |
|
Head Type |
STD/ TFS Twisted |
|
Head CC |
58 |
|
Dome / Dish Height |
-0.162 |
|
Dom/Dish CC |
-25.1 |
|
Compression Ratio |
9.8 |
|
Pin |
.927 x 2.500 |
|
Ring Thickness |
1.5 x 1.5 x 3.0mm |
|
VR Depth |
-.280 / SP |
|
Cubic Inch |
408 |
|
Piston Weight |
446 |
|
Style |
Dish |
|
Valve Reliefs |
3 VR's |
|
Gas Port |
No |
| Product Name | Ford 408ci STD-TFS 4.030 Bore 1.200 CH -25cc (CP Bullets BF6064-030) |
|---|---|
| Brands | CP Carrillo |
| Engine | Ford V8 |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BF6064-030 pistons?
For the BF6064-030 pistons, a typical bore clearance of 0.0020" to 0.0025" is recommended. However, this can vary based on the specific application and operating conditions, so always consult with your engine builder for precise measurements.
What compression ratio can I expect with the BF6064-030 pistons in a 408ci Ford engine?
Using the BF6064-030 pistons with a 58cc head will yield a compression ratio of approximately 9.8:1. Keep in mind that actual compression can vary based on factors such as head gasket thickness and combustion chamber modifications.
What type of ring set is compatible with the BF6064-030 pistons?
The BF6064-030 pistons are designed to work with a ring set that features 1.5mm x 1.5mm x 3.0mm thickness. Ensure that the rings are properly gapped according to your engine's specifications for optimal performance.
What is the piston weight of the BF6064-030, and how does it affect performance?
The BF6064-030 pistons weigh 446 grams. Lighter pistons can improve engine responsiveness and reduce reciprocating mass, but it's essential to balance the entire rotating assembly to maintain reliability and performance.
Are there any specific machining requirements for the BF6064-030 pistons?
Yes, the BF6064-030 pistons may require specific machining for proper fitment, including checking bore size and ensuring correct ring land dimensions. It's crucial to follow the manufacturer's guidelines and work closely with your engine builder to achieve the best results.
