Chevy 432ci ASCS 4.145 Bore 1.000 CH 14.3:1 CR - Lefts & Rights (CP Bullets BCR1215-020)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
Small Block |
|
Part Number |
BCR1215-020 |
|
Bore (in) |
4.145 |
|
Stroke (in) |
4 |
|
Rod Length (in) |
6 |
|
Comp Height |
1 |
|
Head Type |
ASCS |
|
Head CC |
64 |
|
Dome / Dish Height |
0.275 |
|
Dom/Dish CC |
8 |
|
Compression Ratio |
14.4 |
|
Pin |
.927 x 2.500 |
|
Ring Thickness |
1.2 x 1.2 x 3.0mm |
|
VR Depth |
-.335 / SP |
|
Cubic Inch |
432 |
|
Piston Weight |
445 |
|
Style |
Dome |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
No |
| Product Name | Chevy 432ci ASCS 4.145 Bore 1.000 CH 14.3:1 CR - Lefts & Rights (CP Bullets BCR1215-020) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BCR1215-020 pistons?
For the BCR1215-020 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. However, this may vary based on your specific engine build and operating conditions, so always consult with your engine builder for optimal clearances.
What compression ratio can I expect with the BCR1215-020 pistons in my 432ci Chevy engine?
The BCR1215-020 pistons provide a compression ratio of approximately 14.4:1 when used with 64cc ASCS heads. Ensure your fuel quality and tuning are adequate for high compression applications to maintain reliability.
What type of ring gaps should I set for the BCR1215-020 pistons?
For the BCR1215-020 pistons, a common practice is to set the top ring gap around 0.020" to 0.022" and the second ring gap around 0.018" to 0.020". Adjustments may be necessary based on your specific application and operating conditions.
What is the piston weight of the BCR1215-020 and how does it affect my engine?
The BCR1215-020 pistons weigh 445 grams. This weight can influence engine balance and performance, particularly in high RPM applications. Ensure your rotating assembly is balanced accordingly to avoid vibrations and potential engine damage.
Do the BCR1215-020 pistons require any specific machining before installation?
Yes, the BCR1215-020 pistons may require specific machining such as bore honing to achieve the correct clearance. Always verify with your engine builder to ensure proper fitment and performance.
