Chevy 360ci 23° 4.060 Bore 1.560 CH -4.95cc Flat Top - Lefts & Rights (CP Bullets BCRSE1021-060)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
Small Block |
|
Part Number |
BCRSE1021-060 |
|
Bore (in) |
4.06 |
|
Stroke (in) |
3.48 |
|
Rod Length (in) |
5.7 |
|
Comp Height |
1.56 |
|
Head Type |
All 23 deg |
|
Head CC |
64 |
|
Dome / Dish Height |
FT |
|
Dom/Dish CC |
-3.98 |
|
Compression Ratio |
10.3 |
|
Pin |
.927 x 2.250 |
|
Ring Thickness |
1.0 x 1.0 x 2.0mm |
|
VR Depth |
-.280 / SP |
|
Cubic Inch |
360 |
|
Piston Weight |
395 |
|
Style |
FT |
|
Valve Reliefs |
2 VR's R/L |
|
Gas Port |
No |
| Product Name | Chevy 360ci 23° 4.060 Bore 1.560 CH -4.95cc Flat Top - Lefts & Rights (CP Bullets BCRSE1021-060) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BCRSE1021-060 pistons?
For the BCRSE1021-060 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. However, this can vary based on the specific application, operating conditions, and the engine builder's preferences.
What compression ratio can I expect with the BCRSE1021-060 pistons?
The BCRSE1021-060 pistons are designed to achieve a compression ratio of approximately 10.3:1 when used with 64cc cylinder heads. Ensure that the overall combination of components is suitable for your intended use.
What is the weight of the BCRSE1021-060 pistons, and how does it affect performance?
The BCRSE1021-060 pistons weigh 395 grams each. Lighter pistons can improve engine response and reduce reciprocating mass, but it's important to balance them with the rest of the rotating assembly for optimal performance.
Do the BCRSE1021-060 pistons require any specific machining?
Yes, the BCRSE1021-060 pistons may require specific machining for proper fitment, including checking and potentially adjusting the ring land clearances and ensuring the pin bores are correctly sized for your connecting rods.
What type of valve reliefs do the BCRSE1021-060 pistons have?
The BCRSE1021-060 pistons feature two valve reliefs on both the left and right sides. This design accommodates various camshaft profiles, but it's essential to verify clearance with your specific setup.
