Chevy 358ci ASCS 4.135 Bore 1.335 CH 14cc Dome Vert Gas Ports - Lefts & Rights (CP Bullets BCRE1365-010)
Brands
CP Carrillo
Engine
Chev
Make
GM
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BCRE1365-010 pistons?
For the BCRE1365-010 pistons, a typical bore clearance of 0.0035" to 0.0045" is recommended. However, this can vary based on your specific engine build and operating conditions, so always consult with your engine builder for optimal clearances.
What compression ratio can I expect with the BCRE1365-010 pistons?
The BCRE1365-010 pistons are designed to achieve a compression ratio of approximately 14.5:1 when used with a 58cc head. Ensure that your engine's overall setup, including head gasket thickness and combustion chamber volume, is taken into account for accurate compression calculations.
What type of fuel is recommended for the BCRE1365-010 pistons?
Given the high compression ratio of 14.5:1, it is advisable to use high-octane racing fuel to prevent detonation. Ensure your fuel quality meets the demands of your engine's tuning and boost levels for optimal performance.
Do the BCRE1365-010 pistons require any special machining?
Yes, the BCRE1365-010 pistons may require specific machining such as honing of the cylinder bores to achieve the correct clearance. Additionally, ensure that the piston ring gaps are set according to your engine's specifications and intended use.
What is the weight of the BCRE1365-010 pistons and how does it affect performance?
The BCRE1365-010 pistons weigh 512 grams each. While the weight can influence engine response and RPM capabilities, it is crucial to balance the entire rotating assembly for optimal performance and reliability.
