Chevy 357ci ASCS 4.130 Bore 1.335 CH 14cc Dome Vert Gas Ports - Lefts & Rights (CP Bullets BCRE1365-005)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
Small Block |
|
Part Number |
BCRE1365-005 |
|
Bore (in) |
4.13 |
|
Stroke (in) |
3.335 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.335 |
|
Head Type |
ASCS |
|
Head CC |
58 |
|
Dome / Dish Height |
0.5 |
|
Dom/Dish CC |
13.72 |
|
Compression Ratio |
14.5 |
|
Pin |
.927 x 2.250 |
|
Ring Thickness |
1.0 x 1.0 x 2.0mm |
|
VR Depth |
-.335 / SP |
|
Cubic Inch |
357 |
|
Piston Weight |
511 |
|
Style |
Dome |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
Yes |
| Product Name | Chevy 357ci ASCS 4.130 Bore 1.335 CH 14cc Dome Vert Gas Ports - Lefts & Rights (CP Bullets BCRE1365-005) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended compression ratio for the BCRE1365-005 pistons?
The BCRE1365-005 pistons are designed for a compression ratio of approximately 14.5:1, which is suitable for high-performance applications. Ensure that your engine's setup, including fuel quality and tuning, can support this compression level.
What type of gas ports do the BCRE1365-005 pistons feature?
The BCRE1365-005 pistons come with gas ports, which help improve ring seal and reduce blow-by. This feature is particularly beneficial in high-performance applications where maintaining cylinder pressure is critical.
What are the specific machining requirements for these pistons?
When using the BCRE1365-005 pistons, ensure that the bore clearance is set correctly according to your engine's specifications. Additionally, verify that the ring gaps are tailored to your application, as this can significantly affect performance and reliability.
What is the weight of the BCRE1365-005 pistons and how does it affect performance?
The BCRE1365-005 pistons weigh 511 grams. While this weight is typical for high-performance pistons, it's essential to consider the overall rotating assembly balance and how it may impact engine response and RPM capabilities.
Are there specific valve reliefs on the BCRE1365-005 pistons?
Yes, the BCRE1365-005 pistons feature two valve reliefs. This design accommodates specific camshaft profiles and valve sizes, ensuring that there is sufficient clearance during operation. Always check your engine's specific requirements to ensure compatibility.
