Chevrolet SBC 360 Sprint - Dome, Brodix ASCS Head 360, Bore 4.150, CH 1.335, Stroke 3.335, Rod 6.000 - Lefts & Rights (CP Pistons S1371)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
SBC 360 Sprint - Dome, Brodix ASCS Head |
|
Part Number |
S1371 |
|
Bore (in) |
4.15 |
|
Stroke (in) |
3.335 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.335 |
|
Dome / Dish Height |
0.515 |
|
Dom/Dish CC |
12.5 |
|
Pin |
.927x2.750 |
|
Ring Thickness |
1.2 x 1.2 x 3.0mm |
|
VR Depth Int/Exh |
-.330 / SP |
|
Piston Weight |
484 |
|
Gas Port |
Yes |
|
Capacity |
361 |
|
Shlef (RPO) or Made to Order (MTO) |
MTO |
| Product Name | Chevrolet SBC 360 Sprint - Dome, Brodix ASCS Head 360, Bore 4.150, CH 1.335, Stroke 3.335, Rod 6.000 - Lefts & Rights (CP Pistons S1371) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore and stroke for the S1371 pistons?
The S1371 pistons are designed for a bore of 4.150 inches and a stroke of 3.335 inches, making them suitable for a Chevrolet SBC 360 Sprint application.
What is the compression height of the S1371 pistons?
The S1371 pistons have a compression height of 1.335 inches, which is crucial for achieving the desired compression ratio in your engine build.
What is the dome height and volume of the S1371 pistons?
The dome height of the S1371 pistons is 0.515 inches, with a dome volume of 12.5 cc. This affects the overall compression ratio and combustion characteristics of the engine.
What type of gas porting is included with the S1371 pistons?
The S1371 pistons feature gas porting, which helps improve ring seal and performance, particularly in high RPM applications.
What is the weight of the S1371 pistons, and how does it affect performance?
The S1371 pistons weigh 484 grams. Lighter pistons can improve engine response and reduce reciprocating mass, but it's essential to balance them with the rest of the rotating assembly for optimal performance.
