Chevrolet SBC 358ci Brodix ASCS, Bore 4.035, CH 1.250, Stroke 3.500, Rod 6.000, CR 13.6, Dome Head 62 - Lefts & Rights (CP Pistons S1342B)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
SBC 360 Sprint - Dome, Brodix ASCS Head |
|
Part Number |
S1342B |
|
Bore (in) |
4.035 |
|
Stroke (in) |
3.5 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.25 |
|
Dome / Dish Height |
0.53 |
|
Dom/Dish CC |
13.91 |
|
Pin |
.927 x 2.750 |
|
Ring Thickness |
.043 x .043 x 3.0mm |
|
VR Depth Int/Exh |
-.335 / SP |
|
Piston Weight |
495 |
|
Gas Port |
Yes |
|
Capacity |
358 |
|
Shlef (RPO) or Made to Order (MTO) |
ROP |
Designed for Brodix Spec head; lightweight hollow dome with right and left hand forging; Designed for back-cut rings; Pin-fitting included at no cost; Chamfered pins, Rings and wire locks included; Custom skirt cam and barrel shapes; Gas Ports; Accumulator included; Balanced to +/- 1 gram; Fully CNC machined; Pick lock grooves for easy lock removal. Notes:C - .010 Deck Clearance with 3.480 Stroke,
| Product Name | Chevrolet SBC 358ci Brodix ASCS, Bore 4.035, CH 1.250, Stroke 3.500, Rod 6.000, CR 13.6, Dome Head 62 - Lefts & Rights (CP Pistons S1342B) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore and stroke for the S1342B pistons?
The S1342B pistons are designed for a bore of 4.035 inches and a stroke of 3.500 inches, making them suitable for a 358ci Chevrolet SBC engine.
What is the compression ratio when using the S1342B pistons?
These pistons yield a compression ratio of 13.6:1 when used with Brodix ASCS heads, which is ideal for high-performance applications.
What are the specific machining requirements for the S1342B pistons?
Ensure the cylinder bore is honed to the correct clearance for these pistons, and verify that the ring gaps are set according to your specific application and tuning needs.
Can the S1342B pistons be used with gas ports?
Yes, the S1342B pistons feature gas ports, which help improve performance by enhancing ring seal and reducing blow-by in high-performance applications.
What is the weight of the S1342B pistons and how does it affect performance?
The S1342B pistons weigh 495 grams. Their lightweight design contributes to reduced reciprocating mass, which can improve engine response and overall performance.
