Chevrolet Late Model SBC 350 Flat Top X-Style Forgings - Two Barrel Design 358, Bore 4.035, CH 1.125, Stroke 3.500, Rod 6.125 (CP Pistons S1711)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
Late Model SBC 350 Flat Top X Style Forgings - Two Barrel Design |
|
Part Number |
S1711 |
|
Bore (in) |
4.035 |
|
Stroke (in) |
3.5 |
|
Rod Length (in) |
6.125 |
|
Comp Height |
1.125 |
|
Dome / Dish Height |
F.T |
|
Dom/Dish CC |
-2 |
|
Pin |
.927 x 2.000 |
|
Ring Thickness |
.043 x .043 x 3.0mm |
|
VR Depth Int/Exh |
-.185 / SP |
|
Piston Weight |
325 |
|
Gas Port |
Yes |
|
Capacity |
358 |
|
Shlef (RPO) or Made to Order (MTO) |
MTO |
Super lightweight design, Designed for shorter wrist pins; .900 wide or less connecting rod is required; Chamfered pins and wire locks included; Gas ports and cp grooves included; Accumulator and anti detonation grooves included. Notes: D - Rail Support included, E - Can be used with 3.750 Stroke & 6.000 Rod, G - Supplied with Wire Locks.
| Product Name | Chevrolet Late Model SBC 350 Flat Top X-Style Forgings - Two Barrel Design 358, Bore 4.035, CH 1.125, Stroke 3.500, Rod 6.125 (CP Pistons S1711) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What are the specific machining requirements for the CP Pistons S1711?
The CP Pistons S1711 may require specific bore clearance and ring gap settings based on your engine's configuration. Ensure that the bore is honed to the correct size for the 4.035-inch diameter, and set the ring gaps according to the manufacturer's recommendations for your intended application.
Can I use the CP Pistons S1711 with a different stroke or rod length?
While the S1711 is designed for a 3.500-inch stroke and 6.125-inch rod length, it can be used with a 3.750-inch stroke and 6.000-inch rod. However, keep in mind that using different specifications may require additional adjustments to clearances and tuning.
What is the significance of the gas ports included in the S1711 pistons?
The gas ports in the S1711 pistons help improve ring seal and reduce blow-by by allowing combustion gases to pressurise the ring pack. This feature is particularly beneficial in high-performance applications where maintaining optimal cylinder pressure is crucial.
What type of connecting rods are compatible with the S1711 pistons?
The S1711 pistons are designed for use with connecting rods that have a wrist pin width of .900 inches or less. Ensure that your connecting rods are compatible to achieve the best performance and reliability.
What is the weight of the CP Pistons S1711 and how does it affect performance?
The CP Pistons S1711 weighs 325 grams. A lightweight piston can contribute to improved engine response and higher RPM capabilities, but it's essential to balance this with the overall rotating assembly to ensure reliability and performance.
