Chevrolet Brodix-12 Dome 400 Chevrolet 412, Bore 4.155, CH 1.100, Stroke 3.800, Rod 6.000 (CP Pistons S2225)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
Brodix-12 Dome 400 Chevy |
|
Part Number |
S2225 |
|
Bore (in) |
4.155 |
|
Stroke (in) |
3.8 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.1 |
|
Dome / Dish Height |
0.175 |
|
Dom/Dish CC |
1 |
|
Pin |
.927 x 2.750 |
|
Ring Thickness |
1/16 x 1/16 x 3/16 in. |
|
VR Depth Int/Exh |
-.290 / SP |
|
Piston Weight |
471 |
|
Gas Port |
No |
|
Capacity |
412 |
|
Shlef (RPO) or Made to Order (MTO) |
MTO |
Dedicated right and left forgings; Wrist pins and pin-fitting included at no cost; Accumulator groove included; Double pin oilers, force fed from oil ring; Dome may be cut off to flat top; Radius dome for improved flow; Radius valve reliefs; Balanced to +/- 1 gram; Pick lock grooves for easy removal; Fully CNC Machined. Notes: B - Supplied with Double Spiral Locks, D - Rail Support included , F - .073 Locks required, K - Will accommodate .70-.125 V.R spacing
| Product Name | Chevrolet Brodix-12 Dome 400 Chevrolet 412, Bore 4.155, CH 1.100, Stroke 3.800, Rod 6.000 (CP Pistons S2225) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the S2225 pistons?
For the S2225 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. However, final clearance should be determined based on your specific engine build and application.
What type of ring set is compatible with the S2225 pistons?
The S2225 pistons are designed to use a 1/16 x 1/16 x 3/16 inch ring set. Ensure that the rings are properly gapped according to your engine's specifications.
Can the dome height of the S2225 pistons be modified?
Yes, the dome on the S2225 pistons can be cut off to create a flat top if desired. This allows for flexibility in compression ratio adjustments based on your engine setup.
What is the significance of the double pin oilers on the S2225 pistons?
The double pin oilers on the S2225 pistons provide enhanced lubrication to the wrist pins, which helps reduce wear and improve reliability under high-performance conditions.
What is the weight of the S2225 pistons, and how does it affect performance?
The S2225 pistons weigh 471 grams. Lighter pistons can improve engine responsiveness and reduce reciprocating mass, but ensure that your engine's balance and rotating assembly are properly configured.
