Chevrolet 13° Dome 400 Chevrolet 414, Bore 4.125, CH 1.062, Stroke 3.875, Rod 6.000 - Lefts & Rights (CP Pistons S2410A)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
13˚ Dome 400 Chevy |
|
Part Number |
S2410A |
|
Bore (in) |
4.125 |
|
Stroke (in) |
3.875 |
|
Rod Length (in) |
6 |
|
Comp Height |
1.062 |
|
Dome / Dish Height |
0.175 |
|
Dom/Dish CC |
-4.97 |
|
Pin |
.927 x 2.750 |
|
Ring Thickness |
.043 x .043 x 3.0mm |
|
VR Depth Int/Exh |
-.315 / SP |
|
Piston Weight |
458 |
|
Gas Port |
Yes |
|
Capacity |
414 |
|
Shlef (RPO) or Made to Order (MTO) |
ROP |
Dedicated right and left forgings; Pin-fitting included at no cost; Chamfered pins, Rings and wire locks included; Accumulator included; Double pin oilers, force fed from oil ring; Radius valve reliefs; Balanced to +/- 1 gram; Pick lock grooves for easy lock removal; Domes may be cut to a flat top; Designed for back-cut rings; Custom skirt cam and barrel shapes; Fully CNC Machined. Notes: D – Rail Support included, G – Supplied with Wire Locks
| Product Name | Chevrolet 13° Dome 400 Chevrolet 414, Bore 4.125, CH 1.062, Stroke 3.875, Rod 6.000 - Lefts & Rights (CP Pistons S2410A) |
|---|---|
| Brands | CP Carrillo |
| Engine | Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the S2410A pistons?
The recommended bore clearance for the S2410A pistons typically ranges from 0.0030" to 0.0040". However, this can vary based on the specific engine build and operating conditions, so it's essential to consult with your engine builder for precise specifications.
What type of fuel is suitable for engines using S2410A pistons?
Engines equipped with S2410A pistons are generally designed to run on high-octane fuel, especially if boosted. The specific fuel requirements will depend on the overall engine setup, including compression ratio and tuning, so ensure compatibility with your engine's configuration.
Can the dome height of the S2410A pistons be modified?
Yes, the dome height of the S2410A pistons can be cut to a flat top if desired. However, any modifications should be performed by a qualified machinist to ensure proper balance and performance characteristics are maintained.
What is the significance of the gas ports on the S2410A pistons?
The gas ports on the S2410A pistons are designed to improve ring seal and reduce blow-by by allowing combustion gases to pressurise the ring area. This feature is particularly beneficial in high-performance applications where optimal sealing is critical for power and efficiency.
What should I consider regarding piston weight for the S2410A?
The S2410A pistons weigh 458 grams, which is relatively light for a performance piston. When selecting connecting rods and crankshafts, ensure they are compatible with this piston weight to maintain proper balance and minimise vibration in the engine.
