Carrillo Conrods for 4 cyl GM LTG Ecotec 2.0L w/22mm pin 3/8 Bolt ( GM_BLTG_1HS_6004B6H )
Price is for a set of Conrods
This conrod is special order, please allow up to 2 weeks for delivery if not in stock at CP Carrillo we will let you know the ETA.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
GM |
|
Model Engine Code |
Ecotec 2.0(LTG) with 22mm pin |
|
New Part Number |
SCR9374 |
|
Old Part Number |
GM_BLTG_1HS_6004B6H |
|
Centre to Centre (in) |
6.004 |
|
Centre to Centre (mm) |
152.5 |
|
Style |
PRO-H |
|
Bolt Size |
3/8 |
|
Bolt Type |
WMC |
|
Pin Width (in) |
0.95 |
|
Pin Width (mm) |
24.13 |
|
Big End Width (in) |
1.043 |
|
Bigh End Width (mm) |
26.49 |
|
Big End Bore (in) |
2.0522 |
|
Big End Bore (mm) |
52.125 |
|
Pin Bore |
22mm |
|
Total/Rotate/Receip (grams) |
609 / 416 / 193 |
|
FN |
H |
|
Cylinders |
4 |
Manufactured from USA made oversized proprietary steel forgings to enable proper grain flow and guarantee removal of any surface inclusions, CP-Carrillo ensures strength and durability of each Carrillo rod. Consistent and reliable from the first point of precision manufacturing all the way to extreme uses in racing world, exclusive Carrillo H beam and Pro (S)A designs offer the highest strength-to-weight ratio; Custom designed fasteners; 100 traceability; multi-step final inspection; CP-Carrillo moly based fastener lubrication included.
| Product Name | Carrillo Conrods for 4 cyl GM LTG Ecotec 2.0L w/22mm pin 3/8 Bolt ( GM_BLTG_1HS_6004B6H ) |
|---|---|
| Brands | Carrillo |
| Engine | Ecotec 2.0 [LTG] |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What bolts do these conrods use and how should I tighten them?
These rods use ARP conrod bolts, usually ARP2000 as standard with L19 or CA625+ available on some models. ARP2000 bolts are generally torqued to around 55 ft-lb for 3/8 inch and around 75 ft-lb for 7/16 inch when using ARP Ultra-Torque lube. L19 bolts must be tightened by stretch, not torque. Always refer to the latest ARP instructions for exact specifications.
Do these conrods have a horsepower rating or warranty?
No. Like other performance rods, they do not carry a horsepower or performance warranty. Spool warrants workmanship before installation, but once fitted, power handling depends entirely on machining, clearances, tuning, fuel, boost level and rpm.
Do the big end and small end need machining?
They often do. Crank journals and pin bores vary between engines, so your builder should measure the big end oil clearance and small end pin clearance and hone as required before assembly.
What are the specifications of the Carrillo conrods for the GM Ecotec 2.0 LTG?
The Carrillo conrods for the GM Ecotec 2.0 LTG feature a centre-to-centre length of 6.004 inches (152.5 mm), a big end bore of 2.0522 inches (52.125 mm), and a pin bore of 22 mm. They are designed with a big end width of 1.043 inches (26.49 mm) and are manufactured from high-strength steel forgings.
Are there any specific machining requirements for these conrods?
Yes, while the Carrillo conrods are precision manufactured, it is advisable to check the big-end and small-end clearances during installation. Depending on your engine's specifications and the condition of the components, honing may be required to achieve the correct fit.
What is the weight of the Carrillo conrods for the Ecotec 2.0 LTG?
The total weight of each Carrillo conrod is approximately 609 grams, with a rotating weight of 416 grams and a reciprocating weight of 193 grams. This weight contributes to the overall performance and balance of the engine.
How long does it take to receive these conrods if they are not in stock?
These conrods are special order items, and if they are not in stock at CP Carrillo, you should allow up to 2 weeks for delivery. You will be informed of the estimated time of arrival if there are any delays.
What type of fasteners are included with the Carrillo conrods?
The Carrillo conrods come standard with custom-designed ARP 3/8 bolts, which are known for their strength and reliability. Moly-based fastener lubrication is also included to ensure proper installation and performance.