Carrillo Conrods for 4 cyl Ford Duratec / Mazda 2.0L MZR Pro-A 3/8 Bolt (F-DT20-1<A-65758H )
Price is for a set of Conrods
This conrod is special order, please allow up to 2 weeks for delivery if not in stock at CP Carrillo we will let you know the ETA.
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Ford |
|
Model Engine Code |
Duratec 2.0 |
|
New Part Number |
SCR4584 |
|
Old Part Number |
F-DT20-1 |
|
Centre to Centre (in) |
5.758 |
|
Centre to Centre (mm) |
146.25 |
|
Style |
PRO-A |
|
Bolt Size |
3/8 |
|
Bolt Type |
WMC |
|
Pin Width (in) |
0.71 |
|
Pin Width (mm) |
18.03 |
|
Big End Width (in) |
0.859 |
|
Bigh End Width (mm) |
21.82 |
|
Big End Bore (in) |
1.9699 |
|
Big End Bore (mm) |
50.035 |
|
Pin Bore |
21mm |
|
Total/Rotate/Receip (grams) |
488 / 370 / 118 |
|
FN |
H |
|
Cylinders |
4 |
Manufactured from USA made oversized proprietary steel forgings to enable proper grain flow and guarantee removal of any surface inclusions, CP-Carrillo ensures strength and durability of each Carrillo rod. Consistent and reliable from the first point of precision manufacturing all the way to extreme uses in racing world, exclusive Carrillo H beam and Pro (S)A designs offer the highest strength-to-weight ratio; Custom designed fasteners; 100 traceability; multi-step final inspection; CP-Carrillo moly based fastener lubrication included.
| Product Name | Carrillo Conrods for 4 cyl Ford Duratec / Mazda 2.0L MZR Pro-A 3/8 Bolt (F-DT20-1 |
|---|---|
| Brands | Carrillo |
| Engine | 2.0 L Duratec |
| Make | Ford |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What bolts do these conrods use and how should I tighten them?
These rods use ARP conrod bolts, usually ARP2000 as standard with L19 or CA625+ available on some models. ARP2000 bolts are generally torqued to around 55 ft-lb for 3/8 inch and around 75 ft-lb for 7/16 inch when using ARP Ultra-Torque lube. L19 bolts must be tightened by stretch, not torque. Always refer to the latest ARP instructions for exact specifications.
Do these conrods have a horsepower rating or warranty?
No. Like other performance rods, they do not carry a horsepower or performance warranty. Spool warrants workmanship before installation, but once fitted, power handling depends entirely on machining, clearances, tuning, fuel, boost level and rpm.
Do the big end and small end need machining?
They often do. Crank journals and pin bores vary between engines, so your builder should measure the big end oil clearance and small end pin clearance and hone as required before assembly.
What is the recommended machining process for the Carrillo conrods SCR4584?
The Carrillo conrods SCR4584 may require big-end honing to ensure proper fitment due to variations in factory journal sizes. It's essential to check clearances and perform any necessary machining to achieve optimal performance.
What are the specifications for the big end bore and pin bore of the SCR4584 conrods?
The big end bore for the SCR4584 conrods is approximately 1.9699 inches (50.035 mm), while the pin bore is 21 mm. Ensure that these dimensions match your crankshaft and piston specifications for proper fitment.
Can I use these conrods in a high-performance application?
Yes, the SCR4584 conrods are designed for high-performance applications, including racing. However, reliability will depend on proper machining, clearances, tuning, and the overall setup of your engine.
What is the weight of the SCR4584 conrods?
The total weight of the SCR4584 conrods is 488 grams, with a rotating weight of 370 grams and a reciprocating weight of 118 grams. This weight contributes to the overall performance and balance of your engine.
What is the centre-to-centre length of the SCR4584 conrods?
The centre-to-centre length of the SCR4584 conrods is 5.758 inches (146.25 mm). Ensure this measurement aligns with your engine's specifications for proper fitment.
