Big Block Chevy 532 ci 4.600 1.245 CH +46.9cc (CP Bullets BBCRE5333-100)
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
|
Make |
Chevrolet |
|
Engine Type |
Big Block |
|
Part Number |
BBCRE5333-100 |
|
Bore (in) |
4.6 |
|
Stroke (in) |
4 |
|
Rod Length (in) |
6.535 |
|
Comp Height |
1.245 |
|
Head Type |
BB3 Xtra / Head Hunter |
|
Head CC |
118 |
|
Dome / Dish Height |
0.65 |
|
Dom/Dish CC |
46.9 |
|
Compression Ratio |
13.6 |
|
Pin |
.990 x 2.750 |
|
Ring Thickness |
1.0 x 1.0 x 3.0mm |
|
VR Depth |
-.310 / .100 |
|
Cubic Inch |
532 |
|
Piston Weight |
691 |
|
Style |
Dome |
|
Valve Reliefs |
2 VR's |
|
Gas Port |
Yes |
| Product Name | Big Block Chevy 532 ci 4.600 1.245 CH +46.9cc (CP Bullets BBCRE5333-100) |
|---|---|
| Brands | CP Carrillo |
| Engine | Big Block Chev |
| Make | GM |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BBCRE5333-100 pistons?
For the BBCRE5333-100 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. However, final clearance should be determined by the engine builder based on the specific application and operating conditions.
What compression ratio can I expect with these pistons in my Big Block Chevy?
The BBCRE5333-100 pistons are designed to achieve a compression ratio of approximately 13.6:1 when used with a 118cc cylinder head. Ensure that your engine's specific setup, including head gasket thickness and combustion chamber volume, is taken into account for accurate calculations.
What type of ring set is compatible with the BBCRE5333-100 pistons?
The BBCRE5333-100 pistons are compatible with a 1.0 x 1.0 x 3.0mm ring set. Ensure that the rings are properly gapped according to the engine's intended use and operating conditions.
What is the significance of the gas ports on the BBCRE5333-100 pistons?
The gas ports on the BBCRE5333-100 pistons help improve ring sealing and reduce blow-by by allowing combustion gases to pressurise the ring pack. This feature is particularly beneficial in high-performance applications where optimal ring performance is crucial.
What is the weight of the BBCRE5333-100 pistons, and how does it affect engine balance?
The BBCRE5333-100 pistons weigh 691 grams. It's important to consider this weight when balancing the rotating assembly, as it can impact engine performance and reliability. Ensure that all components are balanced together for optimal operation.
