We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the M1091 piston kit?
The recommended bore clearance for the M1091 piston kit is typically between 0.0020" to 0.0025". However, it's essential to verify this with your engine builder as clearances can vary based on specific applications and tolerances.
What type of rings are included in the M1091 piston kit?
The M1091 piston kit includes CP's CPN-3386 ring sets, which are designed for optimal performance and reliability. Ensure proper installation and follow the provided instructions for ring end gaps.
Can I use the M1091 pistons with stock Yamaha SVHO/FZR/FZS conrods?
Yes, the M1091 pistons are compatible with stock Yamaha SVHO/FZR/FZS conrods. However, it is recommended to check the conrod condition and ensure proper fitment and clearances during assembly.
What is the compression ratio of the M1091 piston kit, and how does it affect performance?
The M1091 piston kit has a compression ratio of 8.5:1. This lower compression ratio is suitable for high-boost applications, providing a balance between performance and reliability. Always consider tuning and fuel quality when aiming for optimal performance.
Is any special machining required for the M1091 piston kit installation?
Yes, the cylinder bore may require honing to achieve the correct clearance for the M1091 pistons. Additionally, ensure the cylinder head and block surfaces are clean and properly finished to avoid sealing issues.
