ARP Chevrolet LS Gen III (cam retainer plate)134-1002
For shipping cost -add all the products you would like, then navigate to the shopping cart to calculate shipping quote.
Cam Bolt Kit
Chevrolet LS Gen III (cam retainer plate)
Kit #: 134-1002
| Specifications | |
|---|---|
| Socket Size(s) | 10mm hex |
| High Performance | 180,000psi |
| UHL (Qty: 4) | 20mm |
| Thread Size | M8 x 1.25 |
| Material | 8740 Chrome Moly |
Kit Instructions:
https://tech.arp-bolts.com/instructions/134-1002.pdf
| Product Name | ARP Chevrolet LS Gen III (cam retainer plate)134-1002 |
|---|---|
| Brands | ARP |
| Engine | 6.0L V8, Chev LS7, Chev LS 5.3L (15° Heads), Chev LS (15° Heads), Chev LT1, GM / LS, LS 5.7L, LS 5.7L and 6.0L V8 |
| Make | Chevrolet, GM, Holden, LS Chev |
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure, get in touch by emailing [email protected], messaging us on Facebook, or phoning us at +61 7 5645 1333 (8am to 2pm AET).
Why choose matched valve springs for performance cams?
Spring pressure must match the cam profile and rpm limit. Too little causes valve float; too much causes wear.
Do I need adjustable cam gears?
They allow fine-tuning of cam timing, especially useful after head machining or when running non-standard cams.
What is the purpose of the ARP cam retainer plate kit 134-1002?
The ARP cam retainer plate kit 134-1002 is designed to secure the camshaft in place within the Chevrolet LS Gen III engines. It ensures proper alignment and stability, which is critical for maintaining timing accuracy and overall engine performance.
What torque specifications should I use for the ARP cam bolts in this kit?
For the M8 x 1.25 cam bolts included in the ARP 134-1002 kit, you should follow ARP's recommended torque specifications. Generally, it's advisable to use a torque value around 25 ft-lb, but always refer to ARP's latest instructions for the most accurate guidance.
Can I use the ARP 134-1002 kit with other LS engine variants?
Yes, the ARP 134-1002 cam retainer plate kit is compatible with various LS engine variants, including the LS5.3L, LS5.7L, LS6.0L, and LS7. However, ensure that the specific application adheres to the required specifications and installation procedures.
What material are the cam bolts made from in the ARP 134-1002 kit?
The cam bolts in the ARP 134-1002 kit are made from 8740 chrome moly steel, which provides high strength and durability, capable of withstanding high-performance applications with tensile strength ratings of up to 180,000 psi.
Is there any special installation procedure for the cam retainer plate?
While the installation of the cam retainer plate using the ARP 134-1002 kit is straightforward, it's crucial to ensure that the mating surfaces are clean and free of debris. Follow ARP's installation instructions carefully to achieve the correct torque and prevent any issues during operation.
