Big Block Chevy -2.9cc Flat Top 4.280 bore 4.000 stroke 6.135 rod, 8 to 1 with 118cc head (CP Bullets BBC5020-030)
Brands
CP Carrillo
Engine
Big Block Chev
Make
GM
Delivery & Freight
We are an Australian-based company that ships items nationally and internationally, usually within 48 hours of receiving your order. High-value items shipped internationally are sent via DHL Express, while lower-value items are sent via Australia Post Express unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link. .
If you only see the Click and Collect shipping option, it means that your address was not validated correctly.
If you have issues calculating freight, please get in touch. We are happy to help.
Disclaimer:
Product images are for description purposes only. Actual product may vary.
What information do I need to match these pistons to my engine?
You need the engine code, bore size, stroke, rod length, pin diameter and target compression ratio. These determine the correct piston compression height and crown design.
How should ring gaps be set for these pistons?
Ring gaps must be set by your engine builder based on fuel type, boost level and the intended rpm range. Forced-induction engines usually require larger gaps.
Are forged pistons suitable for street engines?
Yes. Forged pistons handle detonation and high cylinder pressure better than cast units. Your builder should set the piston-to-bore clearance to suit your application.
What is the recommended bore clearance for the BBC5020-030 pistons?
For the BBC5020-030 pistons, a typical bore clearance of 0.0030" to 0.0035" is recommended. This ensures proper thermal expansion and prevents piston scuffing.
What compression ratio can I expect with the BBC5020-030 pistons and 118cc heads?
With the BBC5020-030 pistons and 118cc heads, you can expect a compression ratio of approximately 7.9:1. However, this can vary based on actual combustion chamber volume and gasket thickness.
What type of ring set is compatible with the BBC5020-030 pistons?
The BBC5020-030 pistons use a ring set with dimensions of 1/16 x 1/16 x 3/16 inches. Ensure that the rings are properly gapped according to your specific application.
What is the weight of the BBC5020-030 pistons, and how does it affect engine balance?
The BBC5020-030 pistons weigh 445 grams each. It's important to consider this weight when balancing the rotating assembly to ensure smooth operation and reliability at high RPM.
Can I use the BBC5020-030 pistons with a different stroke or rod length?
The BBC5020-030 pistons are designed for a 4.000" stroke and 6.135" rod length. Using them with a different stroke or rod length may require additional modifications and could affect compression and fitment.
