CP Bullet LS Pistons 4.125" Stroke (15° Heads)
CP Bullet Series Pistons
Suit Chevrolet LS 4.125" Stroke (15°Heads)
|Part Number||Bore||Stroke||Rod||Comp Height||Head Type||Head CC||Dome Height||Dish / Dome||C/R||Pin Dia||VR Depths||Weight||Type||VR|
|BLS1129-005||4.070||4.125||6.125||1.050||Std 15 deg/ L92||68.0||.175||+9.5cc||13.5:1||.927 x 2.250||.200 / SP||448||Dome||2 VR's|
|BLS1129-STD||4.065||4.125||6.125||1.050||Std 15 deg/ L92||68.0||.175||+9.5cc||13.5:1||.927 x 2.250||.200 / SP||448||Dome||2 VR's|
|BLS1132-030||4.030||4.125||6.125||1.050||Std 15 deg/ L92||68.0||F.T.||-2.7cc||11.5:1||.927 x 2.250||.175 / SP||448||FT||2 VR's|
|BLS1132-065||4.065||4.125||6.125||1.050||Std 15 deg/ L92||68.0||F.T.||-2.7cc||11.7:1||.927 x 2.250||.175 / SP||449||FT||2 VR's|
|BLS1132-070||4.070||4.125||6.125||1.050||Std 15 deg/ L92||68.0||F.T.||-2.7cc||11.7:1||.927 x 2.250||.175 / SP||449||FT||2 VR's|
|BLS1132-075||4.075||4.125||6.125||1.050||Std 15 deg/ L92||68.0||F.T.||-2.7cc||11.8:1||.927 x 2.250||.175 / SP||450||FT||2 VR's|
|BLS1132-080||4.080||4.125||6.125||1.050||Std 15 deg/ L92||68.0||F.T.||-2.7cc||11.8:1||.927 x 2.250||.175 / SP||450||FT||2 VR's|
|BLS1134-005||4.005||4.125||6.125||1.050||Std 15 deg/ L92||68.0||-.165||-23.9cc||9.2:1||.927 x 2.250||.175 / SP||403||Dish||2 VR's|
|BLS1134-030||4.030||4.125||6.125||1.050||Std 15 deg/ L92||68.0||-.1455||-21.5cc||9.5:1||.927 x 2.250||.175 / SP||406||Dish||2 VR's|
|BLS1134-125||4.125||4.125||6.125||1.065||Std 15 deg/ L92||68.0||-.175||-30cc||9.4:1||.927 x 2.250||.265 / SP||440||Dish||2 VR's|
Please note: All care is taken to provide the correct specifications; however Spool Imports is not responsible for any incorrect specifications listed. It is important to confirm your specifications with other available manufacturer resources before ordering any parts for an engine. If you need more information please contact email@example.com
- Pistons manufactured from 2618 alloy for strength and durability
- Balanced to + or – 1 gram
- Dual forced pin oilers
- Contact reduction grooves
- Accumulator Grooves
- Contemporary ring set included (Comes standard with 1.5mm x 1.5mm x 3.0mm ring pack that consists of High-grade Steel Gas Nitrided barrel faced tops with Taper Hook Groove Napier second rings and a 3-piece soft nitrided rail flex vent oils, specially designed for severe duty applications such as nitrous blowers and turbo engines.)
- Forged side relief
- Chromoly wrist pins with wire locks
- FEA designed forging
- Tight tolerances
- USA made
|Product Name||CP Bullet LS Pistons 4.125" Stroke (15° Heads)|
|Engine||Chev LS (15° Heads)|
|Make||GM Chevrolet, Holden|
We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link and for Australia you need to select from ALL dropdowns i.e. Country, State, Suburb and Postcode for the quote system to work. (there is a small delay as it searches) For International you just need the Country to get a quote, more detail is required at Check out to complete order
Our shipping providers do not deliver to P.O. Boxes.
If you have issues calculating freight please get in touch, the most common reason is post code does not match suburb or you are entering a p.o box.
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure get in touch with firstname.lastname@example.org.