Spool Toyota 2JZ-GTE 94mm Stroke Crankshaft
Toyota 2JZ-GTE 3.4L Billet 4340 94mm Stroker Crankshaft
The 2JZ GTE engine in its factory form has a 86.1mm bore and 86mm stroke, giving a displacement of 2997cc.
Using the 94 mm stroker crank, std length Conrods and Custom Pistons, the displacement is increased as follows:
- 86.6mm bore and the 94 mm stroker crank = 3285cc / 288cc increase
- 87.1mm bore and the 94 mm stroker crank = 3362cc / 365cc increase
The Spool 2JZ Stoker Crank is a true billet crankshaft machined from Billet 4340 core stock (not a cast forging blank that is final machined).
Each crank is machined from core stock 4340 on a CNC machine, then Nitrided and final ground.
Rated at 1500HP plus
With the increased cubic capacity from the 94mm stroker crank, increases of up to 50% in torque and low to mid range power are achievable. Boost will come on earlier in the rev range and peak power will increase.
- 4340 Grade Billet Steel
- Fully Counter Weighted
- Nitrided Finish
- Fully Balanced
- Stroke 94mm
|Product Name||Spool Toyota 2JZ-GTE 94mm Stroke Crankshaft|
We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.
You can calculate shipping rates inside the cart. After adding all the products you would like, navigate to the cart and fill in your Country, State and Postcode.
If you have issues calculating freight please get in touch.
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure get in touch with email@example.com.