Spool Ford XR6 Turbo Rebuild Kit with CP Bullet Forged Pistons and Drag Pro I Beams

Add a set of Spool by Kelford camshafts in the drop down below and receive 10% off the camshafts.
AUD$2,420.00 AUD$2,200.00
Availability: In stock
SKU
SPO-REB-KIT-FOR-XR6T-CP-BUL-DP

Spool Ford XR6 Turbo Rebuild Kit with CP Bullet Forged Pistons and Drag Pro I Beams

These CP Bullet Pistons are rated at up to 1000hp

Available in:

  • Bore: +0.5mm, +0.25mm, and *STD
  • Comp Ratio: 9.0:1

This Rebuild Kit includes the following quality parts:

  • Spool Forged Drag Po I Beam Conrods with 7/16 ARP 2000 Fasteners
  • CP Bullet Forged Pistons with 4 x Valve Reliefs (Rings, Pins and Locks Included)
  • Cometic MLS Head Gasket
  • ACL Race Series Main Bearings - STD or 0.25mm
  • ACL Race Series Big End Bearings - STD or 0.25mm

These Spool CP Bullet Pistons feature:

  • 4 x Valve Pockets
  • 2618 Forged Alloy
  • Offset Gudgeon Pin
  • 0.200” 51 pins STD
  • Upgraded 0.200” and 0.250” 9310 pins are available when adding to cart.
  • Includes piston rings, pins and pin locks.

Spool Drag Pro I Beam connecting rods are the ultimate high strength direct fit Conrod for all Ford XR6 Turbo engines.

With new features like:

  • Upgraded ARP2000 7/16 bolts
  • Increased strength to the beam
  • Increased strength around the fasteners / bolts
  • Increased strength around the gudgeon pin

Spool Connecting Rods Feature:

  • ARP 2000 fasteners (L19 fasteners are available as an upgrade)
  • High tensile 4340 forged steel
  • 2 Piece forging
  • Hardness of HRC36-42
  • Dowelled caps for precision alignment
  • X-RAY & Sonic tested
  • Quenching and heat treated
  • Shot peened
  • 100% Magnafluxed
  • Weight Matched Sets +/- 1 gram
  • Vacuum degassed to remove impurities

Please Note:

*STD bore size pistons are not recommended in a used bore for any performance engine unless the bores have done minimal work with minimal wear and the correct piston to bore clearance can be adhered to.

All piston manufacturers have a specific piston to bore clearance that they recommend. If STD bore pistons are requested and there is a piston to bore clearance issue we will not exchange or refund, due to the reasons given above.

More Information
Product Name Spool Ford XR6 Turbo Rebuild Kit with CP Bullet Forged Pistons and Drag Pro I Beams
Engine Barra XR6

We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.

You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link and for Australia you need to select from ALL dropdowns i.e. Country, State, Suburb and Postcode for the quote system to work. (there is a small delay as it searches) For International you just need the Country to get a quote, more detail is required at Check out to complete order

Our shipping providers do not deliver to P.O. Boxes.

If you have issues calculating freight please get in touch, the most common reason is post code does not match suburb or you are entering a p.o box.

Product images are for description purposes only. Actual product may vary.

Shipping calculations available at checkout.

If you are unsure get in touch with sales@spoolimports.com.

We found other products you might like!