Spool H beam Ford XR6 Turbo Rebuild Kit with CP Bullet Forged Pistons
Spool Ford XR6 Turbo Rebuild Kit with CP Bullet Forged Pistons
These CP Bullet pistons are rated at up to 1000hp
- Bore: +0.5mm, +0.25mm, and *STD
- Comp Ratio: 9.0:1
This Rebuild Kit includes the following quality parts:
- Spool Forged H Beam Conrods
- CP Bullet Forged Pistons with 4 x Valve Reliefs (Rings, Pins and Locks Included)
- Cometic MLS Head Gasket
- ACL Race Series Main Bearings - STD or 0.25mm
- ACL Race Series Big End Bearings - STD or 0.25mm
These Spool CP Custom Pistons feature:
- CP's heavy duty forging
- 4 x Valve Pockets
- 0.200” 51 pins STD
- Upgraded 0.200” and 0.250” 9310 pins are available when adding to cart.
- Includes piston rings, pins and pin locks.
Spool Connecting Rods Feature:
- ARP 2000 fasteners (L19 fasteners are available as an upgrade)
- High tensile 4340 forged steel
- 2 Piece forging
- Hardness of HRC36-42
- Dowelled caps for precision alignment
- X-RAY & Sonic tested
- Quenching and heat treated
- Shot peened
- 100% Magnafluxed
- Weight Matched Sets +/- 1 gram
- Vacuum degassed to remove impurities
Note: We recommend Joe Gibbs Break in Oil for all new engines.
*STD bore size pistons are not recommended in a used bore for any performance engine unless the bores have done minimal work with minimal wear and the correct piston to bore clearance can be adhered to.
All piston manufacturers have a specific piston to bore clearance that they recommend. If STD bore pistons are requested and there is a piston to bore clearance issue we will not exchange or refund, due to the reasons given above.
|Product Name||Spool H beam Ford XR6 Turbo Rebuild Kit with CP Bullet Forged Pistons|
We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.
You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link and for Australia you need to select from ALL dropdowns i.e. Country, State, Suburb and Postcode for the quote system to work. (there is a small delay as it searches) For International you just need the Country to get a quote, more detail is required at Check out to complete order
Our shipping providers do not deliver to P.O. Boxes.
If you have issues calculating freight please get in touch, the most common reason is post code does not match suburb or you are entering a p.o box.
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure get in touch with email@example.com.