Spool CA18DET Stroker Short Engine

AUD$5,950.00 AUD$5,409.09
Availability: In stock
Only 1 left
SKU
SPOOL-SHORT-ENG-CA18-STR

This product requires custom shipping. Please get in touch for rates.

Spool CA18DET Stroker Short Engine

Precisely Machined, Blueprinted and Assembled

All machining, assembly and blueprinting performed by PLR Performance Engines.

(Note: An exchange block is required with any Spool Short Engine purchase)

From $5,495

The Spool CA18DET Stroker Short Engine typically includes:

  • Custom forged CP pistons - any comp and bore size is available
  • Spool billet, nitrided, full counterweight 87.6mm stroke crank
  • Spool 4340 H beam conrods - ARP2000 3/8 bolts
  • ARP main studs
  • ACL race series main and b/e bearings
  • New welsch plugs
  • New oil gallery soft plugs
  • 87.6mm stroke x 84mm bore = 1942cc
  • Block has been torque plate bored and hone
  • Decked block surface
  • Rotating assembly balance
  • Spool Short Engines typically include the following:

    • Dismantle block
    • Hot tank and wash block
    • Clearance block for stroker crankshaft (where applicable)
    • Torque plate bore and hone block
    • Supply and remove/fit welsch plugs
    • Drill and tap extra idler hole
    • Machine annular groove in main bearing seats (optional)
    • Debur main bearing seats
    • Grind crank (where applicable)
    • Regrind crank to size (where applicable)
    • Check tunnel and hone (where applicable)
    • Mount and measure crank main journals
    • Mount and measure crank big end journals
    • Mount and measure crank in block with rods fitted
    • Check conrod small ends / piston pins and clearance
    • Balance assembly
    • Check deck alignment
    • Deck / machine block
    • Remove and fit 2 x Oil Gallery Plugs
    • Re-clean and inspect
    • Measure and set bearing clearances
    • Measure piston to bore clearances
    • Set ring gaps
    • Assemble short engine
    More Information
    Product Name Spool CA18DET Stroker Short Engine
    Engine CA18

    We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.

    You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link and for Australia you need to select from ALL dropdowns i.e. Country, State, Suburb and Postcode for the quote system to work. (there is a small delay as it searches) For International you just need the Country to get a quote, more detail is required at Check out to complete order

    Our shipping providers do not deliver to P.O. Boxes.

    If you have issues calculating freight please get in touch, the most common reason is post code does not match suburb or you are entering a p.o box.

    Product images are for description purposes only. Actual product may vary.

    Shipping calculations available at checkout.

    If you are unsure get in touch with sales@spoolimports.com.