Spool Nissan CA18 Stroker Crankshaft
Nissan CA18DET 87.6mm Billet 4340 Stroker Crankshaft - Rated at 1000HP plus / 10,000 rpm
This is a true billet crankshaft machined from Billet 4340 core stock (not a cast forging blank that is final machined).
Each crank is machined from core stock 4340 on a CNC machine, then Nitrided and final ground.
Rated at 1000HP plus
With the increased cubic capacity from the 87.6mm m stroker crank, big increases in torque and low to mid range power are achievable. Boost will come on earlier in the rev range and peak power will increase.
The CA18DET engine in its factory form has a 83mm bore and 83.6mm stroke, giving a displacement of 1809cc.
Using the 87.6 mm stroker crank, std length conrods and custom pistons, the displacement is increased as follows:
- 83.5mm bore and the 87.6mm stroker crank = 1919cc / 110cc increase
- 84 mm bore and the 87.6 mm stroker crank = 1942cc / 133cc increase
- Crank Weighs 18kg
- 4340 Grade Billet Steel
- Fully Counter Weighted
- Nitrided Finish
- Fully Balanced
- Stroke 87.6mm
|Product Name||Spool Nissan CA18 Stroker Crankshaft|
We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.
You can calculate shipping rates inside the cart. After adding all the products you would like, navigate to the cart and fill in your Country, State and Postcode.
Our shipping providers do not deliver to PO Boxes.
If you have issues calculating freight please get in touch.
Product images are for description purposes only. Actual product may vary.
Shipping calculations available at checkout.
If you are unsure get in touch with email@example.com.