Holden / Nissan RB30DET (DOHC) Rebuild Kit with Ross Racing Forged Pistons

was AUD$2,080.00 Special Price AUD$1,976.00 AUD$1,796.36
Availability: In stock
SKU
G0B0X8X2WZ-ROSS

Holden / Nissan RB30DET (DOHC) Rebuild Kit with Ross Racing Forged Pistons

This Rebuild Kit includes the following quality parts:

  • Spool Forged H Beam Conrods (ARP 2000 3/8 bolts)
  • Custom Ross Racing Forged Pistons (Rings, Pins and Locks Included)
  • Cometic MLS Head Gasket
  • ACL Race Series Main Bearings - STD or 0.25mm
  • ACL Race Series Big End Bearings - STD or 0.25mm

Ross Racing Pistons Feature:

These Pistons are custom made for Spool and rated at 900-1000hp by Ross Racing Pistons.
With upgrade pins Ross rate these pistons up to 250 bhp per cylinder.
  • Compression Ratio:9.0:1
  • Bore Sizes: 86.5mm or 87mm
  • Pistons come with NPR Gas Nitrided top ring, three pcs. oil
  • 0.225” wall Carbon steel (upgrade to H13 available)
  • Forged 2618
  • Locks

All of Ross Racing Pistons (since 1985) have been forged from 2618 billet bar stock and have been heat treated and aged to a T61 condition (2618-T61). 2618-T61 is the material that is used when fatigue resistance and durability are of prime importance by all premium racing piston manufacturers.

This material has less than 1% silicon particulate content. High silicon content pistons (forged from 4032 or MS75) will not stand up to the most extreme stress placed on many racing pistons. If a crack starts to form in a high silicon piston it will continue until the piston experiences a catastrophic failure. Simply stated, adding sand to the aluminum only makes it more brittle. In the rare instance of a 2618-T61 piston cracking, the crack will continue to an area where the stress is not as great and will then stop. Another advantage of 2618-T61 over the high silicon pistons is the ability to keep its shape under extreme pressure and high RPM's. "Skirt Shrinking" is not a problem with ROSS Racing Pistons.

Spool Connecting Rods Feature:

  • ARP 2000 fasteners (L19 fasteners are available as an upgrade)
  • High tensile 4340 forged steel
  • 2 Piece forging
  • Hardness of HRC36-42
  • Dowelled caps for precision alignment
  • X-RAY & Sonic tested
  • Quenching and heat treated
  • Shot peened
  • 100% Magnafluxed
  • Weight Matched Sets +/- 1 gram
  • Vacuum degassed to remove impurities

Product images are for description purposes only. Actual product may vary.

Shipping calculations available at checkout. If you are unsure get in touch with sales@spoolimports.com

More Information
Product Name Holden / Nissan RB30DET (DOHC) Rebuild Kit with Ross Racing Forged Pistons
Engine RB30DET (DOHC)

We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.

You can calculate shipping rates inside the cart. After adding all the products you would like, navigate to the cart and fill in your Country, State and Postcode.

Our shipping providers do not deliver to PO Boxes.

If you have issues calculating freight please get in touch.

Product images are for description purposes only. Actual product may vary.

Shipping calculations available at checkout.

If you are unsure get in touch with sales@spoolimports.com.