HGT PRECISION 5 SPEED SPECIFICATIONS

GEARS

Our 5 Speed Gearbox is the best choice for Circuit Racing, Road Racing and Time Attack. The gears are straight cut strong and Diamond Ground to DIN5/DIN6 standards for maximum efficiency and even load distribution across the gear teeth. The gears use constant-mesh dog engagement for shifts as quick as 40 milliseconds. Probably the world's quietest straight cut geared, sequentially shifted, dog box transmissions, with almost none of the whine traditionally associated with this industry race standard. This gearbox is totally streetable, generates less heat than competitors and has been successfully tested behind engines with 1500hp/1100kw and 1600nm/1200ftlb in race conditions.

LUBRICATION

Internal Splash

SEALS

O-Ring

INPUT SHAFTS

GM 26 tooth spline
GM/Nissan 26 tooth spline with Nissan spigot
Mazda 23 tooth spline
Nissan 24 tooth spline
Toyota 21 tooth spline (R154)
Toyota 14 tooth spline (V160 / V161/ 6MT)

Others possible on request

WEIGHT

38.5kg or 85lb

SIZE

389mm Long

180mm Wide

277mm Tall

RATIOS

Choose one column

1st 2.44 2.16 2.60

2nd 1.80 1.80 2.16

3rd 1.42 1.42 1.80

4th 1.18 1.18 1.28

5th 1.00 1.00 1.00

Rev 2.94 on all

PORTS

Oil Outlet and Inlet for lines for Pump, Filter and Cooler options

Gearbox Breather

Oil Temperature sensor

Oil Fill

Oil Drain with a magnetic plug

RATINGS

1000 nm / 738 ftlb / 102kg and 11,000 RPM

FRONT PATTERN

GM Muncie

OUTPUT

Flange pre-drilled for 1350 Series Yoke or Slip Yoke - supplied with hardware. Comes pre-fitted with a reluctor wheel ready to accept our Speed Sensor to enable launch control, traction control, speed referenced boost or a digital speedometer.

ACCESSORIES

HGT Billet CNC Shift Lever with remote mount base. Centre of Tunnel, Right or Left Offset shift lever positions. Two different height options to accommodate driver preference. Reverse is integrated into the shift lever and comes with trigger for a reverse light and loom, or reverse can be remotely mounted for Paddle Shift setups

HGT Shift Cut Knob - Analogue signal with a full-bridge system

HGT Billet Paddleshift interface brackets for Motec, Geartronics, Shiftec and Life Racing actuators actuators

HGT Billet CNC Digital Gear Position Display

HGT Billet Push Clutch Release Bearing with Shims

HGT Billet Speed Sensor Bracket and GT101 Sensor

HGT Breather Kit

HGT 1350 Series Yokes bolt up to output flange and weld to the drive shaft. Slip Yoke for one-piece drive shafts, or Non-Slip Yoke for two-piece driveshafts.

BELL HOUSINGS

Cast or Billet Vernier Bell Housings to allow direct fitting of HGT Gearboxes to:

BMW: Straight 6 M50, V8 M60, M62, S62, S65, V10 S85

GM: LS/SBC OEM style with 168 tooth ring gear, front mount starter motor 11”/12” clutch OR Race style with a cover-mounted 110 tooth ring gear, rear mount starter motor and 5.5"/7.25" clutch

Ford: Aluminator, Barra, Coyote, Duratec series, Windsor

Honda: K Series RWD, F20C S2000

Mazda: Rotary Series 6 rear mount starter, MZR-L series

Mitsubishi: EVO 1/2/3 RWD

Nissan: SR20, RB20, RB25, RB26, RB30, VQ35, VQ37, VR38 RWD, L series

Toyota: 1JZ, 2JZ, 1UZ, 3UZ, 3SGE Beams, 86, 4AGE

Others available on request...just ask.

More Information

More Information
Product Name	HGT Precision 5 Speed Sequential Gearbox
Engine	RB34 Stroker, RB32 Stroker, RB30ET (SOHC), RB30DET (DOHC), RB20, RB25, RB26, RB28, RB29, RB30, RB25 NEO, SR20, VQ35DE, VQ35HR, L28, Barra XR6, BPT18/B6, 2.0 L Duratec, 2.3 L Duratec, 2.5 L Duratec, GM / LS, LS 5.7L and 6.0L V8, 2.0 LF MZR, 2.3 L3 MZR, 1JZ, 2JZ, 1UZ-FE, 2UZ-FE, 3SGTE, VG30, VQ30, VR38DETT, VR38DETT Stroker, SR20VE/VET, FA20 / 4U-GSE, 3SGTE Block with 5SFE Crank, Ford Coyote 5.0L V8, RB26/30, RB30/25, RB30/25 NEO, Windsor 351, LS 5.7L, 6.0L V8, RB30ET, FA20, RB30DET, RB20DET, RB25DET, RB26DET, 2JZ-GTE, 1JZ-GTE
Make	Ford, GM Chevrolet, Mazda, Nissan, Toyota, LS Chev

Delivery & Freight

We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.

You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link and for Australia you need to select from ALL dropdowns i.e. Country, State, Suburb and Postcode for the quote system to work. (there is a small delay as it searches) For International you just need the Country to get a quote, more detail is required at Check out to complete order

Our shipping providers do not deliver to P.O. Boxes.

If you have issues calculating freight please get in touch, the most common reason is post code does not match suburb or you are entering a p.o box.

Disclaimer

Product images are for description purposes only. Actual product may vary.

Shipping calculations available at checkout.

If you are unsure get in touch with sales@spoolimports.com.

HGT Precision 5 Speed Sequential Gearbox