Kelford Ford BA-FG Six Cyl Performance Cam (296)

296/296 Degrees advertised duration, 12.40mm/12.40mm lift.

AUD$1,198.00 AUD$1,089.09
Availability: In stock
Only 4 left

These cams still use hydraulic lifters, and suit competition cars only. Use this specification cam for engines around the 1200-1800HP range. Use on fixed cam timing or mechanically limited cam advance/retard

Engine Make: Engine Model: Part Number:
FORD BA-FG Barra 218-C
Valve Clearance: Intake:   Set   at the  
  Exhaust:   Set   at the  
Cam Lift:   Intake: 6.05mm Exhaust: 6.05mm
Rocker Ratio:   Intake: 2.05 Exhaust: 2.05
Nett Valve Lift:   Intake: 12.40mm Exhaust: 12.40mm
Advertised Duration @ 0.10mm Intake: 296 Exhaust: 296
Duration @ 1.00mm VALVE LIFT Intake: 250 Exhaust: 250
Timing @ 1.00mm VALVE LIFT IVO: 12 BTDC EVO: 63 BBDC
    IVC: 58 ABDC EVC: 7 ATDC
Suggested Centre Lines:   Intake: 113 Exhaust: 118
VALVE Lift @ TDC Intake: 2.30mm Exhaust: 1.63

More Information
Product Name Kelford Ford BA-FG Six Cyl Performance Cam (296)
Engine Barra XR6
Make Ford

We are an Australian based company which ships items nationally and international usually within 48 hours of receiving your order. All items shipped internationally are sent express air freight unless otherwise instructed.

You can calculate shipping rates inside the shopping cart. After adding all the products you would like, navigate to the cart and click the ESTIMATE SHIPPING & TAX link and for Australia you need to select from ALL dropdowns i.e. Country, State, Suburb and Postcode for the quote system to work. (there is a small delay as it searches) For International you just need the Country to get a quote, more detail is required at Check out to complete order

Our shipping providers do not deliver to P.O. Boxes.

If you have issues calculating freight please get in touch, the most common reason is post code does not match suburb or you are entering a p.o box.

Product images are for description purposes only. Actual product may vary.

Shipping calculations available at checkout.

If you are unsure get in touch with